Edge bending tool and die of laser cut parts

Edge bending tool and die for laser cut parts

Edge bending, or wiping die bending is achieved by holding the sheet between a pad and die than sliding the wiping flange across the face and bending the sheet metal which sticks out.

  • Low volume part production
  • Laser cut metal parts
  • Four edges of the laser cut part is bent in bending tool and die. Three of the part edges has a 90 degree angle. The forth edge has a different angle.


Bending tool and die
Footprint: 10" x 18"
Storage height: 7.2
Weight: 205 lbs


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Manufactured in Canada

Bending tool and die

Metal bending tool and die for various radiuses

This bending die transforms a strip of straight copper to have a curved shape in the middle. 

Bending copper strips with bending die

The bending die in the middle is interchangeable sizes to create three different radiuses

Metal bending tool and die with adjustable length

Metal bending tool and die with adjustable length

The length of the strip is adjustable with a sliding track.


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

C-frame punch press and dimple hole stamping tool and die for metal door frames

C-frame punch press and dimple hole stamping tool and die for metal door frame

Multicyl cylinder C-frame punch press

  • Air over oil “C” frame bench top punch press
  • Tonnage (output): 12.5 ton capacity at 120 psi
  • Power requirement: compressed air, 90-120 psi
  • Operator control: Foot pedal
  • “M” style quick connect to air supply
  • FRL to filter air supply, regulate air pressure and lubricate

Metal stamping tool and die

  • Punching single dimple holes in 16 – 14 ga thick metal door of different profile sizes, up to 9-1/2 frame
  • Tool is easily removable from the press and can be replaced with different sizes if needed. 


Muffler silencer for benchtop c-frame press punch

Custom wrench for Multicyl cylinder locking ring

Support fixture for metal door frame punching dimple hole

Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada

Cardboard perforating tool and die

Cardboard perforation stamping tool and die

Stamping tool and die punches 100 holes in thick corrugated cardboard.


Vortool Manufacturing

Vortool Manufacturing Ltd.

Unit 240 19358-96 Ave.

Surrey, BC V4N 4C1 Canada


Call: 604-239-7218 | Email


Made in Canada